Product Details:
Blower Type | Centrifugal Blower |
Body Material | Steel |
Brand | MPEP |
Motor Rating | 0-1 HP |
Flow Rate | 0-1000 cfm |
Electric Current Type | AC |
Product Details:
Blade Material | Cast Iron |
Mounting | Duct Fan |
Electric Current Type | AC |
Brand | MPEP |
Number Of Blades | 6 |
Country of Origin | Made in India |
AXIAL FLOW FAN : We provide airfoil designed axial flow fans in various designs such as fixed bladed and variable pitch angle bladed. The impellers are of cast alloy aluminum type and have 4, 6, 7, 8 and 11 blades as per the specific design. These can also be provided in single, two, three or four stage construction to be used as reversible TUNNEL Ventilation Fans. The casting of axial fans can be designed to allow the fans to be used as wall mounting type, tube axial flow type and axial bifurcated type. The sweep size of fans available varies from 300mm to 2000mm and the capacity range upto 280000 CMH
For supply of air for ventilation, or air-conditioning of ships, buildings. Vehicular tunnels, motors and for exhausting air from spray booths etc. available in single, two, three or four stage designs with fixed for variable pitch airfoil blades.
Maximum volume : 100000 M3 /HR.
Maximum pressure : 380 MMWG.
We provide fix bladed and variable pitch angle bladed versions of wide range of high-performance of air filled designed axial flow fans. We, MPEP, offer a wide range of air blowers with customised design solution suitable for any industrial applications having working range.
Quality :
The MPEP Axial Flow Fan is manufactured with components of proven quality.
Range and Duty :
The MPEP Axial Flow Fan is present in single-stage, double-stage, contra-rotating and multiple-stage.
The volume of air can be controlled by switching off some of the fans running in series. The MPEP Axial
Flow Fan fulfils a wide range of requirements-large volumes, high pressure, quietness, high temperature, and wet conditions all catered for.
Product Details:
Mounting Type | Duct Fan |
Power | 1.5 HP |
Material | Aluminum |
Warranty | 1 Year |
Brand | MPEP |
Country of Origin | Made in India |
Ventilation Fan : MPEP also have the acumen to provide our clients with the wide Ventilation system, are among the most important design features of any commercial issue / kitchen / Industries, to give you the best value for your money. MPEP ventilation equipment determines whether it is high performance and standard, light, medium, heavy duty, pollution control units, grease extraction, controls, exhaust as well as the amount of heat, smoke, grease, vapor, water, fresh air/ transfer air, displacement diffusers, HVAC system, ceiling diffusers and combustion products that will be as per client specification.
Product Details:
Pressure | Medium Pressure |
Power Source | Electric Blower |
Blade Material | Cast Iron |
Usage/Application | Industrial |
Surface Treatment | Paint Coated |
Mounting | Floor Mounted |
Voltage | 240 V |
Brand | M.P.E.P. |
Country of Origin | Made in India |
Product Details:
Brand | MPEP |
Material | Stainless Steel |
Width | 850 mm |
Mount Type | Ceiling Mount |
Length | 1600 mm |
Features:
Specifications:
Product Details:
Blower Type | Centrifugal |
Electric Current Type | AC |
Brand | MPEP |
Motor Rating | 0-1 HP |
Flow Rate | 0-1000 cfm |
Country of Origin | Made in India |
Centrifugal Blower : We (MPEP) design, manufacture and supply a range of high quality centrifugal blowers that find
application in foundries, chemical, steel plants, paper, petrochemical plants, cement, plastics,
fertilizers and other industries. Designed using the advanced technology, these blowers are energy
efficient, compact, lightweight, durable, cost-effective and requires little or no maintenance over
the working life. Further, these are also custom designed as per the requirements of the clients.
Cylindrical multi blade rotor in cycloid steel casing. The rotor is driven by a motor placed internally or
externally. Air is expelled centrifugally, if required under very high pressure.
Applications | Fan Types | Product Description : | SPECIAL FEATURES - | Standard Arrangement/Accessories : |
Dust Collection and Control | Forward Curved | A large selection of outlet positions, casing geometries, casing thicknesses | Dynamically balanced impellers | Arrangement 1 : Impeller wheel is overhung, two bearings on a base. The fan and motor are separately mounted to a unitary base |
Pollution-control equipment | Radial Curved | Casing types Low/Medium/High pressure (up to 800 mm WC) | High Efficiency Single thickness blade | Arrangement 3 : The impeller wheel is supported by fan housing with one bearing |
Industrial processing, | Backward Curved Rotor | Material Steel, AISI, Aluminum, special alloy | High temperature construction | Arrangements 2, 4 - 9 can also be made if needed
|
Material Handling | Combines Forward - Backward Curved | Impeller types, Outlet position As required | Compact design for restricted space | Silencer Sound |
Product Details:
Capacity | 10000 CFM |
Motor Power | 0.5 kW |
Blade Material | Stainless Steel |
Body Material | Steel |
Electric Current Type | AC |
Flow Rate | 0-1000 cfm |
Country of Origin | Made in India |
LL / SISW, LLD / DIDW Blower : For many decades, MPEP Industrial Fans & Exhausters have been progressively designed to meet new Air Pollution Control, Humidity, heat.
‘LL/SISW & LLD/DIDW’ Limit Load Blower: Single or double width types available from 1100 to 8,68,000 m3/hr capacity and upto a pressure of 15 cm. S. W. G. Widely used in Air conditioning, Pollution Control and Ventilation fields over decades.
In addition to Single –Width “LL” Fans, MPEP “LLD”/DIDW” Double –Width Fans are of popular use in the industry. Illustration shows Arrangement Three Double –Width “LLD”/DIDW” Fan.
BLOWER CASING : Fan Casings have a very neat appearance, with smooth exterior and interior due to the rolled scroll method of manufacture. This feature equalises the flow of air over the entire outlet area.
ROTORS : Advanced Design “LL/SISW & LLD/DIDW” Rotors are the heart of “LL/SISW” Limit-Load LLD Blowers. These have deep, wide blades, more efficient and very rigid on account of the patent double curved feature. Blades are of construction with wide riveting surface. Small size (lower right) are built without Tie Rods. Large sizes (lower left) have Tie Rods. Very large size have Intermediate Stiffening Rings.
BEARINGS : Sleeve Bearings are specially designed and manufactured to be oil-tight and dust-proof in air travelling at high velocities.
Self-Aligning Ball / Roller Bearings can be furnished in place of the regular sleeve bearings. Ball Bearings are optional in a similar bracket construction.
VARIABLE INLET VANES : MPEP Variable Inlet Vanes are designed for the accurate control of air volume combined with the maximum saving in power at the reduced ratings desired. They are used on the “LL/SISW & LLD/DIDW” blowers, single or double width, mounted in a separate ring frame.
OUTLET DAMPERS : MPEP Louvre Type Outlet Dampers are built in a separate frame attached to the standard fan outlet. Each damper consists of a number of narrow balanced leaves supported on each end by sleeve/ball bearing.
Product Details:
Minimum Order Quantity | 1 piece |
Brand | MPEP |
Size | 75 to 500 mm |
I Deal In | New Only |
Technique | Hot Rolled |
Filling efficiency | 70 to 80 % |
Country of Origin | Made in India |
Rotary Air Lock Valve : We (MPEP) are engaged in Manufacture and supply Rotary Air Lock Valve. Rotary Air Lock valve used on dust collection systems, large and medium size bag filter systems, screw feeder feeding / discharging, mixing, Silo emptying, cyclone discharging , dosing, batching, pneumatic conveying applications, conveyor feeding / unloading, machinery and equipment feeding / discharging and The main function of a rotary valve is to control flow of bulk solids from silo, mixer, solid gas separation, cyclone or hopper under gravity, pressure and vacuum conditions. Airlocks can work on pressure and vacuum applications. The valve is designed with A paddle wheel which is shaft mounted and driven by Motor. The Rotary valve is similar to revolving doors the paddles and blades forms an airtight seal with the housing the Motor slowly move the blades to allow the dust to discharge from the Hopper. We offered our Client specification a wide range of Rotary Air Lock Valve with various Material like Cost Iron M.S, SS-304, SS-316, Aluminum etc.
Features:
Product Details:
Minimum Order Quantity | 1 Unit |
Usage/Application | Industrial |
Finish | coated |
Compressed Air | 0.5 - 0.7 Mpa |
Efficiency | 99.95% |
power | 5 HP for 12 ton capacity |
Country of Origin | Made in India |
Dust Extraction / Collector and Air Handling Unit : We (MPEP) high efficiency configuration designs, manufacture and supply as per clients requirement. MPEP provide various factors like inlet dust load, characteristics of dust, velocity of air, Particle size distribution. MPEP dust extraction / collector finds various application for Paddy parboiling, Foundry, Woodworking, Coal Handling, Boilers, Powder coating, Short blasting, Metal dust, Chemical and Pesticides, Plastics, Grain handling, Cement, etc.
The AHUs both wide range manufacturer, Single Skin AHUs for all Ventilation applications and Double Skin AHUs for all Air conditioning applications. The fan section is designed for DIDW / Centrifugal / plug fan with motor with drain pan is fabricated from S. S / G. I sheet with Coil section is designed for cooling / heating / DX / CHW and direct expansion coil, Entire assembly is mounted on PUF insulated bottom panel or as per customer requirement.
Product Details:
Brand | MPEP |
Power | 140 W |
Phase | Single |
Airflow | 12000-70000m3/H |
Noise Level | 30-35Db |
Automation Grade | Automatic |
Kitchen fume exhaust : We (MPEP) provide are used remove fumes and smokes that occur from processes like electroplating, melting, painting, baking, heating. MPEP manufactured Kitchen fume exhaust and Industrial Fume Extraction systems with the aim of improving quality, reducing costs and protecting the health of society and the environment friendly.
Features:
· Precision functioning
· Sturdy construction
· Low maintenance and Easy installation
· Smooth finish
· Longer life
· Highly effective
Product Details:
Brand | MPEP |
Installation Type | Floor Mounted |
Max Working Pressure | 150 PSI |
Working Temperature | 1 to 60 deg C |
Skin Type | Double Skin |
Country of Origin | Made in India |
Product Details:
Brand | MPEP |
Usage/Application | Industrial |
Airflow | 12000-70000m3/H |
Air Volume | 3500 m3 / h |
Automation Grade | Automatic |